ExamTopics 350-401 Snapshot

Question #: 101 Topic #: 1

826733

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 102 Topic #: 1

826734

Answers

Correct answer and vote data stay hidden until you click reveal.

A. hypervisor
B. virtual router
C. vSwitch
D. pNIC

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 103 Topic #: 1

826735

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Reduce channel width from 40 MHz to 20 MHz.
B. Reduce AP transmit power.
C. Enable Fastlane.
D. Increase minimum mandatory data rate.
E. Disable 2.4 GHz and use only 5 GHz.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 104 Topic #: 1

826736

Answers

Correct answer and vote data stay hidden until you click reveal.

A. patch
B. dipole
C. omnidirectional
D. Yagi

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 105 Topic #: 1

826737

Answers

Correct answer and vote data stay hidden until you click reveal.

A. SNR
B. RSSI
C. EIRP
D. dBi

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 106 Topic #: 1

826738

Answers

Correct answer and vote data stay hidden until you click reveal.

A. unicast discovery request to the first WLC that resolves the domain name
B. broadcast discovery request
C. join request to all the WLCs
D. unicast discovery request to each WLC

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 107 Topic #: 1

826739

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The port-channel mode should be set to auto.
B. The port channel on SW2 is using an incompatible protocol.
C. The port-channel trunk is not allowing the native VLAN.
D. The port-channel interface load balance should be set to src-mac.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 108 Topic #: 1

826740

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It requires a client certificate.
B. It is an IETF standard.
C. It does not require a RADIUS server certificate.
D. It operates in transparent mode.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 109 Topic #: 1

826741

Answers

Correct answer and vote data stay hidden until you click reveal.

A. CISCO-CONTROLLER.local
B. CAPWAP-CONTROLLER.local
C. CISCO-CAPWAP-CONTROLLER.local
D. CISCO-DNA-CONTROLLER.local

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 110 Topic #: 1

826742

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It establishes a one-to-one NAT translation.
B. The 209.165.201.0/27 subnet is assigned as the outside local address range.
C. The 10.1.1.0/27 subnet is assigned as the inside local addresses.
D. Inside source addresses are translated to the 209.165.201.0/27 subnet.
E. The 10.1.1.0/27 subnet is assigned as the inside global address range.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 111 Topic #: 1

826743

Answers

Correct answer and vote data stay hidden until you click reveal.

A. over the DS
B. 802.11k
C. adaptive R
D. 802.11v

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 112 Topic #: 1

826744

Answers

Correct answer and vote data stay hidden until you click reveal.

A. LED lights
B. radar
C. fire alarm
D. conventional oven
E. rogue AP

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 113 Topic #: 1

826745

Answers

Correct answer and vote data stay hidden until you click reveal.

A. transmit power
B. noise floor
C. EIRP
D. RSSI
E. antenna gain

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 114 Topic #: 1

826746

Answers

Correct answer and vote data stay hidden until you click reveal.

A. point-to-multipoint to nonbroadcast
B. broadcast to nonbroadcast
C. point-to-multipoint to broadcast
D. broadcast to point-to-point

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 115 Topic #: 1

826747

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The output displays OSPF hello messages which router R1 has sent or received on interface Fa0/1.
B. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
C. The output displays all OSPF messages which router R1 has sent or received on interface Fa0/1.
D. The output displays OSPF hello and LSACK messages which router R1 has sent or received.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 116 Topic #: 1

826748

Answers

Correct answer and vote data stay hidden until you click reveal.

A. RPs are required only when using protocol independent multicast dense mode.
B. RPs are required for protocol independent multicast sparse mode and dense mode.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers.
D. By default, the RP is needed only to start new sessions with sources and receivers.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 117 Topic #: 1

826749

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Active
B. Passive
C. On
D. Auto

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 118 Topic #: 1

826750

Answers

Correct answer and vote data stay hidden until you click reveal.

A. 2WAY/DROTHER on both routers
B. not established
C. FULL on both routers
D. FULL/BDR on R1 and FULL/BDR on R2

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 119 Topic #: 1

826751

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Enter spanning-tree port-priority 4 on SW2.
B. Enter spanning-tree port-priority 32 on SW1.
C. Enter spanning-tree port-priority 224 on SW1.
D. Enter spanning-tree port-priority 64 on SW2.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 120 Topic #: 1

826752

Answers

Correct answer and vote data stay hidden until you click reveal.

A. No changes occur because the standby router is upgraded before the active router.
B. No changes occur because version 1 and 2 use the same virtual MAC OUI.
C. Each HSRP group reinitializes because the virtual MAC address has changed.
D. Each HSRP group reinitializes because the multicast address has changed.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 121 Topic #: 1

826753

Answers

Correct answer and vote data stay hidden until you click reveal.

A. 192.168.101.10
B. 192.168.101.14
C. 192.168.101.6
D. 192.168.101.18

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 122 Topic #: 1

826754

Answers

Correct answer and vote data stay hidden until you click reveal.

A. auto/desirable
B. desirable/desirable
C. desirable/auto
D. auto/auto

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 123 Topic #: 1

826755

Answers

Correct answer and vote data stay hidden until you click reveal.

A. router with the lowest priority
B. router with the highest priority
C. router with the highest loopback address
D. router with the lowest loopback address

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 124 Topic #: 1

826756

Answers

Correct answer and vote data stay hidden until you click reveal.

A. IPsec
B. IP prefix list-based
C. encrypted authentication
D. TACACS-based authentication
E. IP access list-based

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 125 Topic #: 1

826757

Answers

Correct answer and vote data stay hidden until you click reveal.

A. type 1
B. type 2
C. type 3
D. type 4

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 126 Topic #: 1

826758

Answers

Correct answer and vote data stay hidden until you click reveal.

A. SW1(config)#vtp mode transparent
B. SW3(config)#vtp mode transparent
C. SW2(config)#vtp pruning
D. SW1(config)#vtp pruning

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 127 Topic #: 1

826759

Answers

Correct answer and vote data stay hidden until you click reveal.

A. GLBP
B. HSRP v2
C. VRRP
D. HSRP v1

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 128 Topic #: 1

826760

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0
B. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 10.1.1.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0
C. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.0.0.0 mask 255.0.0.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.0.0.0 mask 255.0.0.0
D. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#neighbor 10.2.2.2 update-source lo0 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 10.1.1.1 remote-as 1 R2(config-router)#neighbor 10.1.1.1 update-source lo0 R2(config-router)#network 10.2.2.0 mask 255.255.255.0

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 129 Topic #: 1

826761

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Yagi
B. patch
C. omnidirectional
D. dipole

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 130 Topic #: 1

826762

Answers

Correct answer and vote data stay hidden until you click reveal.

A. mismatched OSPF link costs
B. mismatched OSPF network type
C. mismatched areas
D. mismatched MTU size

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 131 Topic #: 1

826763

Answers

Correct answer and vote data stay hidden until you click reveal.

A. PKI server
B. NTP server
C. RADIUS server
D. TACACS server

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 132 Topic #: 1

826764

Answers

Correct answer and vote data stay hidden until you click reveal.

A. local mode
B. autonomous
C. SD-Access wireless
D. Mobility Express

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 133 Topic #: 1

826765

Answers

Correct answer and vote data stay hidden until you click reveal.

A. indirect
B. Layer 3 intercontroller
C. intracontroller
D. Layer 2 intercontroller

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 134 Topic #: 1

826766

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 135 Topic #: 1

826767

Answers

Correct answer and vote data stay hidden until you click reveal.

A. route filtering
B. unequal-cost load balancing
C. route summarization
D. equal-cost load balancing

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 136 Topic #: 1

826768

Answers

Correct answer and vote data stay hidden until you click reveal.

A. local preference, weight, AS path, MED
B. weight, local preference, AS path, MED
C. weight, AS path, local preference, MED
D. local preference, weight, MED, AS path

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 137 Topic #: 1

826769

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The local router is attempting to open a TCP session with the neighboring router.
B. The local router is receiving prefixes from the neighboring router and adding them in RIB-IN.
C. The local router has active prefixes in the forwarding table from the neighboring router.
D. The local router has BGP passive mode configured for the neighboring router.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 138 Topic #: 1

826770

Answers

Correct answer and vote data stay hidden until you click reveal.

A. SwitchC(config)#vtp pruning vlan 110
B. SwitchC(config)#vtp pruning
C. SwitchC(config)#interface port-channel 1 SwitchC(config-if)#switchport trunk allowed vlan add 210,310
D. SwitchC(config)#interface port-channel 1 SwitchC(config-if)#switchport trunk allowed vlan remove 110

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 139 Topic #: 1

826771

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R4(config-router)bgp default local-preference 200
B. R3(config-router)bgp default local-preference 200
C. R4(config-router)neighbor 10.2.2.2 weight 200
D. R3(config-router)neighbor 10.1.1.1 weight 200

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 140 Topic #: 1

826772

Answers

Correct answer and vote data stay hidden until you click reveal.

A. load balancing of unequal-cost paths
B. load balance over four equal-cost paths
C. uses interface bandwidth to determine best path
D. per-packet load balancing over multiple paths

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 141 Topic #: 1

826773

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Stratum 0
B. Stratum 1
C. Stratum 14
D. Stratum 15

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 142 Topic #: 1

826774

Answers

Correct answer and vote data stay hidden until you click reveal.

A. SW1(config-if)#interface Gi0/0 SW1(config-if)#no spanning-tree bpdufilter SW1(config-if)#shut SW1(config-if)#no shut
B. SW1(config-if)#interface Gi0/0 SW1(config-if)#no spanning-tree bpduguard enable SW1(config-if)#shut SW1(config-if)#no shut
C. SW1(config-if)#interface Gi0/0 SW1(config-if)#spanning-tree bpduguard enable SW1(config-if)#shut SW1(config-if)#no shut
D. SW1(config-if)#interface Gi0/1 SW1(config-if)#spanning-tree bpduguard enable SW1(config-if)#shut SW1(config-if)#no shut

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 143 Topic #: 1

826775

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Not all of the controllers in the mobility group are using the same mobility group name.
B. Not all of the controllers within the mobility group are using the same virtual interface IP address.
C. All of the controllers within the mobility group are using the same virtual interface IP address.
D. All of the controllers in the mobility group are using the same mobility group name.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 144 Topic #: 1

826776

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The RP maintains default aging timeouts for all multicast streams requested by the receivers.
B. The RP acts as a control-plane node only and does not receive or forward multicast packets.
C. The RP is the multicast router that is the root of the PIM-SM shared multicast distribution tree.
D. The RP responds to the PIM join messages with the source of a requested multicast group.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 145 Topic #: 1

826777

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The AP is joining a primed WLC
B. The APs broadcast traffic is unable to reach the WLC through Layer 2
C. The AP multicast traffic is unable to reach the WLC through Layer 3
D. The WLC is running a different software version

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 146 Topic #: 1

826778

Answers

Correct answer and vote data stay hidden until you click reveal.

A. SW1(config)#int gi1/1 SW1(config)#switchport trunk allowed vlan 1-9,11-4094
B. SW2(config)#int gi1/2 SW2(config)#switchport trunk allowed vlan 10
C. SW2(config)#int gi1/2 SW2(config)#switchport trunk allowed vlan 1-9,11-4094
D. SW1(config)#int gi1/1 SW1(config)#switchport trunk allowed vlan 10

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 147 Topic #: 1

826779

Answers

Correct answer and vote data stay hidden until you click reveal.

A. GLBP
B. LACP
C. HSRP
D. VRRP

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 148 Topic #: 1

826780

Answers

Correct answer and vote data stay hidden until you click reveal.

A. inter-controller
B. inter-subnet
C. intra-VLAN
D. intra-controller

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 149 Topic #: 1

826781

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Option 43
B. Option 60
C. Option 67
D. Option 150

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 150 Topic #: 1

826782

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1(config-if)interface Gi0/0 R1(config-if)ip ospf network point-to-point R2(config-if)interface Gi0/0 R2(config-if)ip ospf network point-to-point
B. R1(config-if)interface Gi0/0 R1(config-if)ip ospf network broadcast R2(config-if)interface Gi0/0 R2(config-if)ip ospf network broadcast
C. R1(config-if)interface Gi0/0 R1(config-if)ip ospf database-filter all out R2(config-if)interface Gi0/0 R2(config-if)ip ospf database-filter all out
D. R1(config-if)interface Gi0/0 R1(config-if)ip ospf priority 1 R2(config-if)interface Gi0/0 R2(config-if)ip ospf priority 1

Discussions

Discussions hidden. Click reveal to view 1 linked thread.