ExamTopics 350-401 Snapshot

Question #: 51 Topic #: 1

826683

Answers

Correct answer and vote data stay hidden until you click reveal.

A. IPsec
B. OMP
C. RSVP
D. BFD

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 52 Topic #: 1

826684

Answers

Correct answer and vote data stay hidden until you click reveal.

A. the Type field in the Layer 2 frame
B. the Options field in the Layer 3 header
C. the TOS field in the Layer 3 header
D. the Flags field in the Layer 3 header

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 53 Topic #: 1

826685

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Cloud deployments require longer implementation times than on-premises deployments.
B. Cloud deployments are more customizable than on-premises deployments.
C. Cloud deployments have lower upfront costs than on-premises deployments.
D. Cloud deployments require less frequent upgrades than on-premises deployments.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 54 Topic #: 1

826686

Answers

Correct answer and vote data stay hidden until you click reveal.

A. vBond
B. vSmart
C. vManage
D. PNP Server

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 55 Topic #: 1

826687

Answers

Correct answer and vote data stay hidden until you click reveal.

A. centrally switched back to WLC where the user traffic is mapped to a VXLAN on the WLC
B. converted by the AP into 802.3 and encapsulated into VXLAN
C. centrally switched back to WLC where the user traffic is mapped to a VLAN on the WLC
D. converted by the AP into 802.3 and encapsulated into a VLAN

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 56 Topic #: 1

826688

Answers

Correct answer and vote data stay hidden until you click reveal.

A. configure matching hold and delay timers
B. configure matching key-strings
C. configure matching priority values
D. configure unique virtual IP addresses

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 57 Topic #: 1

826689

Answers

Correct answer and vote data stay hidden until you click reveal.

A. standby 2 priority
B. standby 2 preempt
C. standby 2 track
D. standby 2 timers

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 58 Topic #: 1

826690

Answers

Correct answer and vote data stay hidden until you click reveal.

A. configure option 43 Hex F104.AC10.3205
B. configure option 43 Hex F104.CA10.3205
C. configure dns-server 172.16.50.5
D. configure dns-server 172. 16.100.1

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 59 Topic #: 1

826691

Answers

Correct answer and vote data stay hidden until you click reveal.

A. to establish secure control plane connections
B. to monitor, configure, and maintain SD-WAN devices
C. to provide secure data plane connectivity over WAN links
D. to perform initial authentication of devices

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 60 Topic #: 1

826692

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It determines which switch becomes active or standby.
B. It determines if the hardware is compatible to form the StackWise Virtual domain.
C. It rejects any unidirectional link traffic forwarding.
D. It discovers the StackWise domain and brings up SVL interfaces.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 61 Topic #: 1

826693

Answers

Correct answer and vote data stay hidden until you click reveal.

A. vSwitch must interrupt the server CPU to process the broadcast packet.
B. The Layer 2 domain can be large in virtual machine environments.
C. Virtual machines communicate primarily through broadcast mode.
D. Communication between vSwitch and network switch is broadcast based.
E. Communication between vSwitch and network switch is multicast based.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 62 Topic #: 1

826694

Answers

Correct answer and vote data stay hidden until you click reveal.

A. TCP window size
B. IP MTU
C. TCP MSS
D. DF bit clear
E. MTU ignore

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 63 Topic #: 1

826695

Answers

Correct answer and vote data stay hidden until you click reveal.

A. ETR
B. MR
C. ITR
D. MS

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 64 Topic #: 1

826696

Answers

Correct answer and vote data stay hidden until you click reveal.

A. default VRF
B. VRF VPN_A
C. VRF VPN_B
D. management VRF

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 65 Topic #: 1

826697

Answers

Correct answer and vote data stay hidden until you click reveal.

A. reduced rack space, power, and cooling requirements
B. smaller Layer 2 domain
C. increased security
D. speedy deployment
E. reduced IP and MAC address requirements

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 66 Topic #: 1

826698

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Route targets control the import and export of routes into a customer routing table.
B. When BGP is configured, route targets are transmitted as BGP standard communities.
C. Route targets allow customers to be assigned overlapping addresses.
D. Route targets uniquely identify the customer routing table.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 67 Topic #: 1

826699

Answers

Correct answer and vote data stay hidden until you click reveal.

A. PITR
B. map resolver
C. map server
D. PETR

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 68 Topic #: 1

826700

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques.
B. Type 1 hypervisor relies on the existing OS of the host machine to access CPU, memory, storage, and network resources.
C. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS.
D. Type 1 hypervisor enables other operating systems to run on it.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 69 Topic #: 1

826701

Answers

Correct answer and vote data stay hidden until you click reveal.

A. VXLAN encapsulates a Layer 2 frame in an IP-UDP header, which allows Layer 2 adjacency across router boundaries.
B. VXLAN uses the Spanning Tree Protocol for loop prevention.
C. VXLAN extends the Layer 2 Segment ID field to 24-bits, which allows up to 4094 unique Layer 2 segments over the same network.
D. VXLAN uses TCP as the transport protocol over the physical data center network.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 70 Topic #: 1

826702

Answers

Correct answer and vote data stay hidden until you click reveal.

A. MSS
B. MTU
C. MRU
D. window size

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 71 Topic #: 1

826703

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Virtual machines do not require a unique IP or unique MAC. They share the IP and MAC address of the physical server.
B. Each virtual machine requires a unique IP address but shares the MAC address with the physical server.
C. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
D. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 72 Topic #: 1

826704

Answers

Correct answer and vote data stay hidden until you click reveal.

A. TLOC
B. RLOC
C. DNS
D. VTEP
E. EID

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 73 Topic #: 1

826705

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Oracle VM VirtualBox
B. Microsoft Hyper-V
C. VMware server
D. VMware ESXi
E. Microsoft Virtual PC

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 74 Topic #: 1

826706

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 75 Topic #: 1

826707

Answers

Correct answer and vote data stay hidden until you click reveal.

A. tunneling traffic from IPv6 to IPv4 VXLANs
B. allowing encrypted communication on the local VXLAN Ethernet segment
C. encapsulating and de-encapsulating VXLAN Ethernet frames
D. tunneling traffic from IPv4 to IPv6 VXLANs

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 76 Topic #: 1

826708

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Use a virtual switch provided by the hypervisor.
B. Use a virtual switch running as a separate virtual machine.
C. Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.
D. Use a single routed link to an external router on stick.
E. Use a single trunk link to an external Layer2 switch.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 77 Topic #: 1

826709

Answers

Correct answer and vote data stay hidden until you click reveal.

A. runs directly on a physical server and depends on a previously installed operating system
B. runs directly on a physical server and includes its own operating system
C. runs on a virtual server and depends on an already installed operating system
D. runs on a virtual server and includes its own operating system

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 78 Topic #: 1

826710

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The keepalive value is modified from the default value.
B. The physical interface MTU is 1476 bytes.
C. The tunnel mode is set to the default.
D. Interface tracking is configured.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 79 Topic #: 1

826711

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It creates two entries for each network node, one for its identity and another for its location on the network.
B. It allows LISP to be applied as a network virtualization overlay though encapsulation.
C. It allows multiple instances of a routing table to co-exist within the same router.
D. It creates head-end replication used to deliver broadcast and multicast frames to the entire network.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 80 Topic #: 1

826712

Answers

Correct answer and vote data stay hidden until you click reveal.

A. policy plane forwarding
B. control plane forwarding
C. data plane forwarding
D. systems management and orchestration

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 81 Topic #: 1

826713

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The packet is discarded on router B
B. The packet arrives on router C without fragmentation
C. The packet arrives on router C fragmented
D. The packet is discarded on router A

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 82 Topic #: 1

826714

Answers

Correct answer and vote data stay hidden until you click reveal.

A. VNID
B. switch fabric
C. VTEP
D. host switch

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 83 Topic #: 1

826715

Answers

Correct answer and vote data stay hidden until you click reveal.

A. mainframe
B. host
C. virtual machine
D. container

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 84 Topic #: 1

826716

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 85 Topic #: 1

826717

Answers

Correct answer and vote data stay hidden until you click reveal.

A. bridge domain
B. VLAN
C. VNI
D. VRF

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 86 Topic #: 1

826718

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Router(config-if)#ip address 192.168.1.1 255.255.255.0
B. Router(config-vrf)#address-family ipv4
C. Router(config-vrf)#ip address 192.168.1.1 255.255.255.0
D. Router(config-if)#address-family ipv4
E. Router(config-vrf)#address-family ipv6

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 87 Topic #: 1

826719

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Because dynamic routing is not enabled.
B. Because the tunnel cannot reach its tunnel destination.
C. Because the best path to the tunnel destination is through the tunnel itself.
D. Because the router cannot recursively identify its egress forwarding interface.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 88 Topic #: 1

826720

Answers

Correct answer and vote data stay hidden until you click reveal.

A. better application performance
B. improved security because the underlying OS is eliminated
C. improved density and scalability
D. ability to operate on hardware that is running other OSs

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 89 Topic #: 1

826721

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Create an IPsec profile, associate the transform-set ACL, and apply the profile to the tunnel interface.
B. Apply the crypto map to the tunnel interface and change the tunnel mode to tunnel mode ipsec ipv4.
C. Remove all configuration related to crypto map from R1 and R2 and eliminate the ACL.
D. Create an IPsec profile, associate the transform-set, and apply the profile to the tunnel interface.
E. Remove the crypto map and modify the ACL to allow traffic between 10.10.0.0/24 to 10.20.0.0/24.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 90 Topic #: 1

826722

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Multiple virtual servers can be deployed on the same physical server without having to buy additional hardware.
B. Virtual machines increase server processing performance.
C. The CPU and RAM resources on a virtual machine cannot be affected by other virtual machines.
D. Deploying a virtual machine is technically less complex than deploying a physical server.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 91 Topic #: 1

826723

Answers

Correct answer and vote data stay hidden until you click reveal.

A. a Type 1 hypervisor and a host operating system
B. a hypervisor and physical server hardware
C. only a Type 1 hypervisor
D. only a Type 2 hypervisor

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 92 Topic #: 1

826724

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Oracle VM VirtualBox
B. Citrix XenServer
C. VMware server
D. Microsoft Virtual PC

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 93 Topic #: 1

826725

Answers

Correct answer and vote data stay hidden until you click reveal.

A. increased MTU size
B. VM-level isolation
C. extended 802.1Q VLAN range
D. hardware independence
E. increased flexibility

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 94 Topic #: 1

826726

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It must run the same operating system as its host.
B. It is deployable without a hypervisor to host it.
C. It must be aware of other virtual machines, in order to allocate physical resources for them.
D. It relies on hypervisors to allocate computing resources for it.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 95 Topic #: 1

826727

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Proxy ITR
B. ITR
C. ETR
D. Proxy ETR

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 96 Topic #: 1

826728

Answers

Correct answer and vote data stay hidden until you click reveal.

A. proxy ETR
B. egress tunnel router
C. route reflector
D. HMAC algorithm
E. spoke

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 97 Topic #: 1

826729

Answers

Correct answer and vote data stay hidden until you click reveal.

A. provide the routing underlay and overlay for VXLAN headers
B. dynamically discover the location of end hosts in a VXLAN fabric
C. encapsulate and de-encapsulate traffic into and out of the VXLAN fabric
D. statically point to end host locations of the VXLAN fabric

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 98 Topic #: 1

826730

Answers

Correct answer and vote data stay hidden until you click reveal.

A. interface Ethernet0/0 ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf bank network 172.16.0.0 255.255.0.0
B. interface Ethernet0/0 vrf forwarding hotel ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf Hotel network 172.16.0.0 0.0.255.255 area 0
C. interface Ethernet0/0 vrf forwarding bank ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf bank network 172.16.0.0 0.0.255.255 area 0
D. interface Ethernet0/0 ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf hotel network 172.16.0.0 255.255.0.0

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 99 Topic #: 1

826731

Answers

Correct answer and vote data stay hidden until you click reveal.

A. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 Vlan10 ip route 172.16.1.0 255.255.255.0 Vlan20
B. ip route vrf Customer1 172.16.1.1 255.255.255.255 172.16.1.1 global ip route vrf Customer2 192.168.1.200 255.255.255.0 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 Vlan10 ip route 172.16.1.0 255.255.255.0 Vlan20
C. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer2 ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 Customer1
D. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer1 ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 Customer2

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 100 Topic #: 1

826732

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The tunnel keepalive is configured incorrectly because they must match on both sites.
B. The tunnel destination will be known via the tunnel interface.
C. The tunnel will be established and work as expected.
D. The default MTU of the tunnel interface is 1500 bytes.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.