ExamTopics 350-401 Snapshot

Question #: 201 Topic #: 1

826833

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 202 Topic #: 1

826834

Answers

Correct answer and vote data stay hidden until you click reveal.

A. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#access-list 1 10.10.10.0 0.0.0.255 RouterR1(config)#ip nat inside source list 1 interface f0/1 overload
B. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#access-list 1 10.10.10.0 0.0.0.255 RouterR1(config)#ip nat pool POOL 155.1.1.101 155.1.1.103 netmask 255.255.255.0 RouterR1(config)#ip nat inside source list 1 pool POOL
C. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#ip nat inside source static 10.10.10.101 155.1.1.101 RouterR1(config)#ip nat inside source static 10.10.10.102 155.1.1.102 RouterR1(config)#ip nat inside source static 10.10.10.103 155.1.1.103
D. RouterR1(config)#int f0/0 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#ip nat inside source static 10.10.10.101 155.1.1.101 RouterR1(config)#ip nat inside source static 10.10.10.102 155.1.1.102 RouterR1(config)#ip nat inside source static 10.10.10.103 155.1.1.103

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 203 Topic #: 1

826835

Answers

Correct answer and vote data stay hidden until you click reveal.

A. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode negotiate NewYork(config-if)#end NewYork#
B. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode on NewYork(config-if)#end NewYork#
C. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode passive NewYork(config-if)#end NewYork#
D. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode auto NewYork(config-if)#end NewYork#

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 204 Topic #: 1

826836

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure more member ports on Switch1.
B. Configure less member ports on Switch2.
C. Configure the same port channel interface number on both switches.
D. Configure the same EtherChannel protocol on both switches.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 205 Topic #: 1

826837

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The first packet triggered NAT to add an entry to the NAT table.
B. R1 is configured with NAT overload parameters.
C. A Telnet session from 160.1.1.1 to 10.1.1.10 has been initiated.
D. R1 is configured with PAT overload parameters.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 206 Topic #: 1

826838

Answers

Correct answer and vote data stay hidden until you click reveal.

A. OSPF area change
B. MTU mismatch
C. IP address mismatch
D. hello packet mismatch

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 207 Topic #: 1

826839

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1(config-router)#neighbor 10.10.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
B. R2(config-router)#neighbor 10.120.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
C. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor PEER password Cisco
D. R1(config-router)#neighbor 10.120.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
E. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 208 Topic #: 1

826840

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Change Switch2 to switch port mode dynamic auto.
B. Change the VTP domain to match on both switches.
C. Change Switch1 to switch port mode dynamic auto.
D. Change Switch1 to switch port mode dynamic desirable.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 209 Topic #: 1

826841

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 210 Topic #: 1

826842

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 211 Topic #: 1

826843

Answers

Correct answer and vote data stay hidden until you click reveal.

A. IGMPv2 is compatible only with IGMPv2.
B. IGMPv3 is compatible only with IGMPv3.
C. IGMPv2 is compatible only with IGMPv1.
D. IGMPv3 is compatible only with IGMPv1

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 212 Topic #: 1

826844

Answers

Correct answer and vote data stay hidden until you click reveal.

A. SNR
B. Noise
C. RSSI
D. CCI

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 213 Topic #: 1

826845

Answers

Correct answer and vote data stay hidden until you click reveal.

A. 15 dB
B. 16 dB
C. 18 dB
D. 20 dB

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 214 Topic #: 1

826846

Answers

Correct answer and vote data stay hidden until you click reveal.

A. monitor
B. bridge
C. local
D. sniffer

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 215 Topic #: 1

826847

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The packet reaches R2, and the TTL expires.
B. R1 replies with a TTL exceeded message.
C. The packet reaches R3, and the TTL expires.
D. R2 replies with a TTL exceeded message.
E. R3 replies with a TTL exceeded message.
F. The packet reaches R1, and the TTL expires.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 216 Topic #: 1

826848

Answers

Correct answer and vote data stay hidden until you click reveal.

A. the value given to the strength of the wireless signal received compared to the noise level
B. the value of how strong the wireless signal is leaving the antenna using transmit power, cable loss, and antenna gain
C. the value of how much wireless signal is lost over a defined amount of distance
D. the value of how strong a wireless signal is received, measured in dBm

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 217 Topic #: 1

826849

Answers

Correct answer and vote data stay hidden until you click reveal.

A. monitor
B. rogue detector
C. FlexConnect
D. sniffer
E. local

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 218 Topic #: 1

826850

Answers

Correct answer and vote data stay hidden until you click reveal.

A. switchport nonegotiate
B. no switchport
C. switchport mode dynamic desirable
D. switchport mode access

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 219 Topic #: 1

826851

Answers

Correct answer and vote data stay hidden until you click reveal.

A. wlchostname.domain.com
B. cisco-capwap-controller.domain.com
C. ap-manager.domain.com
D. primary-wlc.domain.com

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 220 Topic #: 1

826852

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Uplink and Downlink Orthogonal Frequency Division Multiple Access
B. Channel bonding
C. Wi-Fi Protected Access 3
D. 4096 Quadrature Amplitude Modulation Mode

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 221 Topic #: 1

826853

Answers

Correct answer and vote data stay hidden until you click reveal.

A. wireless client
B. wireless LAN controller
C. access point
D. WCS location server

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 222 Topic #: 1

826854

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Router(config if)# vrrp 115 track 1 decrement 100 Router(config-if)# vrrp 115 preempt
B. Router(config-if)# vrrp 115 priority 100
C. Router(config-if)# vrrp 115 track 1 decrement 10 Router(config-if)# vrrp 115 preempt
D. Router(config-if)# standby 115 priority 100 Router(config-if)# standby 115 preempt

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 223 Topic #: 1

826855

Answers

Correct answer and vote data stay hidden until you click reveal.

A. MSDP allows a rendezvous point to dynamically discover active sources outside of its domain.
B. MSDP SA request messages are used to request a list of active sources for a specific group.
C. MSDP depends on BGP or multiprotocol BGP for interdomain operation.
D. MSDP messages are used to advertise active sources in a domain.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 224 Topic #: 1

826856

Answers

Correct answer and vote data stay hidden until you click reveal.

A. 15
B. 1.2
C. גˆ’165
D. .83

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 225 Topic #: 1

826857

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure the channel-group mode on SW3 Gi0/0 and Gi0/1 to active.
B. Configure the mode on SW2 Gi0/0 to trunk.
C. Configure the channel-group mode on SW2 Gi0/0 and Gi0/1 to on.
D. Configure the mode on SW2 Gi0/1 to access.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 226 Topic #: 1

826858

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Reconfigure the pool to use the 192.168.1.0 address range.
B. Configure a match-host type NAT pool.
C. Increase the NAT pool size to support 254 usable addresses.
D. Configure a one-to-one type NAT pool.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 227 Topic #: 1

826859

Answers

Correct answer and vote data stay hidden until you click reveal.

A. EIGRP is more prone to routing loops than OSPF.
B. EIGRP uses more CPU and memory than OSPF.
C. EIGRP has a full map of the topology, and OSPF only knows directly connected neighbors.
D. EIGRP supports equal or unequal path cost, and OSPF supports only equal path cost.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 228 Topic #: 1

826860

Answers

Correct answer and vote data stay hidden until you click reveal.

A. client mode
B. SE-connect mode
C. sensor mode
D. sniffer mode

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 229 Topic #: 1

826861

Answers

Correct answer and vote data stay hidden until you click reveal.

A. intra-VLAN
B. inter-controller
C. intra-controller
D. inter-subnet

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 230 Topic #: 1

826862

Answers

Correct answer and vote data stay hidden until you click reveal.

A. TrustSec
B. Advanced Malware Protection for Endpoints
C. NetFlow
D. Cisco Umbrella

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 231 Topic #: 1

826863

Answers

Correct answer and vote data stay hidden until you click reveal.

A. UDP jitter
B. ICMP jitter
C. TCP connect
D. ICMP echo

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 232 Topic #: 1

826864

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The device received a valid NETCONF request and serviced it without error.
B. The NETCONF running datastore is currently locked.
C. A NETCONF request was made for a data model that does not exist.
D. A NETCONF message with valid content based on the YANG data models was made, but the request failed.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 233 Topic #: 1

826865

Answers

Correct answer and vote data stay hidden until you click reveal.

A. CDP
B. SNMP
C. LLDP
D. ping
E. NETCONF
F. a specified range of IP addresses

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 234 Topic #: 1

826866

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 235 Topic #: 1

826867

Answers

Correct answer and vote data stay hidden until you click reveal.

A. interface between the controller and the consumer
B. RESTful API interface for orchestrator communication
C. interface between the controller and the network devices
D. NETCONF API interface for orchestrator communication

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 236 Topic #: 1

826868

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Only one session can be configured at a time.
B. A special VLAN type must be used as the RSPAN destination.
C. A filter must be configured for RSPAN sessions.
D. Only incoming traffic can be monitored.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 237 Topic #: 1

826869

Answers

Correct answer and vote data stay hidden until you click reveal.

A. RSPAN
B. ERSPAN
C. VSPAN
D. IPSPAN

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 238 Topic #: 1

826870

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The RSPAN VLAN is replaced by VLAN 223.
B. RSPAN traffic is sent to VLANs 222 and 223.
C. An error is flagged for configuring two destinations.
D. RSPAN traffic is split between VLANs 222 and 223.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 239 Topic #: 1

826871

Answers

Correct answer and vote data stay hidden until you click reveal.

A. RSPAN session 1 is incompletely configured for monitoring.
B. RSPAN session 1 monitors activity on VLAN 50 of a remote switch.
C. SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15.
D. SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 240 Topic #: 1

826872

Answers

Correct answer and vote data stay hidden until you click reveal.

A. 1
B. 2
C. 4
D. 8

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 241 Topic #: 1

826873

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Only the flows of top 100 talkers are exported.
B. CPU and memory utilization are reduced.
C. The number of packets to be analyzed are reduced.
D. The data export flow is more secure.
E. The accuracy of the data to be analyzed is improved.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 242 Topic #: 1

826874

Answers

Correct answer and vote data stay hidden until you click reveal.

A. under the interface
B. under the flow record
C. under the flow monitor
D. under the flow exporter

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 243 Topic #: 1

826875

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure the logging synchronous global configuration command.
B. Configure the logging synchronous command under the vty.
C. Increase the number of lines on the screen using the terminal length command.
D. Configure the logging delimiter feature.
E. Press the TAB key to reprint the command in a new line.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 244 Topic #: 1

826876

Answers

Correct answer and vote data stay hidden until you click reveal.

A. logging host 10.2.3.4 vrf mgmt transport tcp port 514
B. logging host 10.2.3.4 vrf mgmt transport udp port 514
C. logging host 10.2.3.4 vrf mgmt transport tcp port 6514
D. logging host 10.2.3.4 vrf mgmt transport udp port 6514

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 245 Topic #: 1

826877

Answers

Correct answer and vote data stay hidden until you click reveal.

A. notification
B. emergency
C. critical
D. alert

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 246 Topic #: 1

826878

Answers

Correct answer and vote data stay hidden until you click reveal.

A. error
B. warning
C. informational
D. notification

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 247 Topic #: 1

826879

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Traffic received on VLANs 10, 11, and 12 is copied and sent to interface g0/1.
B. Traffic sent on VLANs 10 and 12 only is copied and sent to interface g0/1.
C. Traffic sent on VLANs 10, 11, and 12 is copied and sent to interface g0/1.
D. Traffic received on VLANs 10 and 12 only is copied and sent to interface g0/1.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 248 Topic #: 1

826880

Answers

Correct answer and vote data stay hidden until you click reveal.

A. monitor session 1 source interface port-channel 6
B. monitor session 1 source vlan 10
C. monitor session 1 source interface FastEthemet0/1 rx
D. monitor session 1 source interface port-channel 7, port-channel 8

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 249 Topic #: 1

826881

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It creates device packs through the use of an SDK.
B. It uses an API call to interrogate the devices and register the returned data.
C. It obtains MIBs from each vendor that details the APIs available.
D. It imports available APIs for the non-Cisco device in a CSV format.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 250 Topic #: 1

826882

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Those details are provided to Cisco DNA Center by the Identity Services Engine.
B. The administrator had to assign the username to the IP address manually in the user database tool on Cisco DNA Center.
C. Cisco DNA Center pulled those details directly from the edge node where the user connected.
D. User entered those details in the Assurance app available on iOS and Android devices.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.