ExamTopics 350-401 Snapshot

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Enable the Avoid Persistent Non-WiFi interference option
• B. Change the DCA Sensitivity option to High
• C. Enable the Event Driven Radio Resource Management option
• D. Disable the Avoid Foreign AP Interference option

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. It displays the access list sequence numbers from the output of the show ip access-list extended flp command on the terminal screen
• B. It displays the output of the show ip access-list extended flp command on the terminal screen
• C. It reads the access list sequence numbers from the output of the show ip access-list extended flp command into a dictionary list
• D. It reads the output of the show ip access-list extended flp command into a dictionary list

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. The signal strength at location C is too weak to support web surfing
• B. Location D has the strongest RF signal strength
• C. The RF signal strength at location B is 50% weaker than location A
• D. The RF signal strength at location C is 10 times stronger than location B
• E. The signal strength at location B is 10 dB better than location C

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Services
• B. Provisioning
• C. Assurance
• D. Design

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. OSPF uses a default hello timer of 5 seconds. EIGRP uses a default hello timer of 10 seconds.
• B. OSPF uses multicast addresses 224.0.0.5 and 224.0.0.6. EIGRP uses multicast address 224.0.0.10.
• C. OSPF uses an administrative distance of 115. EIGRP uses an administrative distance of 160.
• D. OSPF uses IP protocol number 88. EIGRP uses IP protocol number 89.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Yagi
• B. patch
• C. directional
• D. omnidirectional

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. virtual private networks
• B. file reputation
• C. VLAN segmentation
• D. Traffic Telemetry
• E. dynamic enforce policy

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. responding to map-request messages
• B. forwarding user data traffic
• C. finding EID-to-RLOC mappings
• D. accepting registration requests from ETRs

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Add a new DNS record to resolve the FQDN to the PSN IP address
• B. Create and sign a new CSR that contains the static FQDN entry
• C. Manually configure the hosts file on each user device.
• D. Disable HTTPS on the WLC under the Management menu
• E. Add the FQDN entry under the WLC virtual interface

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A.
  
• B.
  
• C.
  
• D.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. VXLAN network identifier
• B. source and destination RLOC ID
• C. endpoint ID
• D. original Layer 2 VLAN ID

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. There is a routing loop on the network
• B. There is a high delay on the WAN links
• C. Traffic is load-balancing over both links, causing packets to arrive out of order
• D. The voice traffic is using the link with less available bandwidth

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. container
• B. Docker
• C. hypervisor
• D. rkt

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Set the WMM Policy to Allowed
• B. Set the P2P Blocking Action to Disabled
• C. Set the WMM Policy to Required
• D. Set the P2P Blocking Action to Forward-UpStream

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. It extends Layer 2 and Layer 3 overlay networks over a Layer 2 underlay
• B. It has a 12-byte packet header
• C. It uses TCP for transport,
• D. It is a multi-tenant solution.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. content switches
• B. web application firewalls
• C. next-generation intrusion detection systems
• D. Layer 3 transit network devices

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. SIP flow information
• B. Wi-Fi multimedia
• C. VoIP media session awareness
• D. traffic specification

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. use floating static routes
• B. provide configuration consistency across the hosts
• C. run dynamic routing protocols
• D. use advanced IPsec encryption algorithms

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. web authentication
• B. IEEE 802.1x
• C. DHCP
• D. modular QoS
• E. policy routing

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. bandwidth
• B. IP address
• C. processor
• D. secure access

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Enable EAP parameters
• B. Apply CISCO ISE default settings
• C. Select a RADIUS authentication server
• D. Disable the RADIUS server accounting interim update

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A.
  
• B.
  
• C.
  
• D.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. authorization
• B. custom headers
• C. request management
• D. authentication
• E. accounting

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. detect and block ransomware in email attachments
• B. outbound URL analysis and data transfer controls
• C. user context analysis
• D. blocking of fileless malware in real time

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. The TLS certificate of DNA Center is invalid
• B. The username or the password is incorrect
• C. The “dna-center” hostname cannot be resolved to an IP address
• D. The authentication URL is incorrect

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. When the gateway routers are a mix of Cisco and non-Cisco routers.
• B. When encrypted hellos are required between gateways in a single group.
• C. When the traffic load needs to be shared between multiple gateways using a single virtual IP.
• D. When clients need the gateway MAC address to be the same between multiple gateways.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. 0x77
• B. AAA
• C. 0xf1
• D. 642

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. It is more resource efficient than a container.
• B. It provides an environment completely isolated from the host OS.
• C. It is more lightweight than a container.
• D. It shares the host OS kernel, binaries, and libraries.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. interface G0/0
  ip address 209.165.200.225 255.255.255.224
  ip nat outside
  
  interface G0/1
  ip address 10.1.1.1 255.255.255.0
  ip nat inside
  
  ip nat inside source static tcp 209.165.200.225 8080 10.1.1.100 8080
  
• B. interface G0/0
  ip address 209.165.200.225 255.255.255.224
  ip nat inside
  
  interface G0/1
  ip address 10.1.1.1 255.255.255.0
  ip nat outside
  
  ip nat inside source static tcp 10.1.1.1 8080 209.165.200.225 80
  
• C. interface G0/0
  ip address 209.165.200.225 255.255.255.224
  ip nat outside
  
  interface G0/1
  ip address 10.1.1.1 255.255.255.0
  ip nat inside
  
  ip nat inside source static tcp 10.1.1.1 8080 209.165.200.225 80
  
• D. interface G0/0
  ip address 209.165.200.225 255.255.255.224
  ip nat inside
  
  interface G0/1
  ip address 10.1.1.1 255.255.255.0
  ip nat outside
  
  ip nat inside source static tcp 209.165.200.225 80 10.1.1.100 8080

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. line vty 0 15
  password Cisco123
  transport input ssh
  exec-timeout 60
• B. line vty 0 15
  login
  password Cisco123
  transport input ssh
  exec-timeout 60
• C. line vty 0 15
  password Cisco123
  transport input telnet ssh
  exec-timeout 60
• D. line vty 0 15
  password Cisco123
  transport input all
  session-timeout 60

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. as strict data structures defined by RFC 6020
• B. in an XML tree format
• C. in an HTML format
• D. as modules within a tree

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. R2# standby 100 preempt
• B. R2# standby 100 priority 100
• C. R2# standby 100 track 26 decrement 10
• D. R2# track 26 interface Serial0/0.1 line-protocol

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. print (netconf_host.get_config(‘show running’))
• B. port=830
• C. device_params=(‘name’:’los-xe’})
• D. hostkey_verify=True,

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Enable Fast Transition and FT + PSK.
• B. Enable Fast Transition and PSK.
• C. Change Fast Transition to Adaptive Enabled and enable FT + PSK.
• D. Enable PSK and FT + PSK

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. outside global
• B. inside global
• C. outside local
• D. inside local

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. The router will use the address of loppback 0 to communicate with the NTP server.
• B. The router will advertise but not listen to NTP broadcast packets.
• C. The router will be used as an NTP authoritative server only if it synchronized with an outside source.
• D. The router will be used as an NTP authoritative server, even if it is not synchronized with an outside source.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. R2(config-apple)#action 4 cli command “ip add 172.16.1.1 0.0.0.255”
• B. R2(config)# event manager session cli username
• C. R2(config-applet)# event oir
• D. R2(config-applet)# event none sync yes

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. cluster protocol used to facilitate switch failover
• B. mechanism to take control from a failed RP while maintaining connectivity
• C. mechanism used to prevent routing protocol loops during an RP switchover
• D. First Hop Redundancy Protocol for host gateway connectivity

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. application awareness
• B. packet filtering
• C. stateful inspection
• D. deep packet inspection
• E. virtual private network

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Traffic that matches entry 10 of ACL 100 is always dropped.
• B. Class-default is dropped.
• C. Traffic that matches entry 10 of ACL 100 is always allowed with a limited CIR.
• D. Traffic that matches entry 10 of ACL 100 is always allowed.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. flow record recordflow
  exporter flowexport
  record recordflow
  cache timeout active 120
  cache timeout inactive 20
  cache type immediate
• B. flow monitor monitorflow
  exporter flowexport
  record recordflow
  cache timeout active 120
  cache timeout inactive 20
  cache type immediate
• C. flow monitor monitorflow
  exporter recordflow
  cache timeout active 120
  cache timeout inactive 20
  cache type permanent
• D. flow record recordflow
  match ipv6 destination ip-address
  match ipv6 source ip-address
  match ipv6 protocol-type view
  match interface input
  match interface output
  match transport destination-port
  collect counter bytes long

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. Authentication-Down/Switch-Local
• B. Authentication-Down/Switching-Down
• C. Authentication-Central/Switch-Local
• D. Authentication-Local/Switch-Local

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. connects to the device using Telnet and exports the routing table information
• B. connects to the device using SSH and exports the routing table information
• C. displays the output of the show command in an unformatted way
• D. displays the output of the show command in a formatted way

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Answers

Correct answer and vote data stay hidden until you click reveal.

• A. ip access-list extended nms
  permit 1 host 10.15.2.19 any
  
  snmp-server view ro internet included
  
  snmp-server view ro ifEntry included
  
  snmp-server group nms v3 priv notify ro access nms
  snmp-server user user1 nms v3 encrypted auth md5 Password1 pri 3des Password123
  
• B. ip access-list standard nms
  permit 10.15.2.19 0.0.0.0
  
  snmp-server view ro iso included
  
  snmp-server view ro ifEntry included
  
  snmp-server group nms v3 priv read ro access nms
  snmp-server user user1 nms v3 auth sha Password1 pri aes 256 Password123
  
• C. ip access-list standard nms
  permit 10.15.2.19 0.0.0.0
  
  snmp-server view rw iso included
  
  snmp-server view rw ifEntry included
  
  snmp-server group nms v3 auth write rw access nms
  snmp-server user user1 nms v3 auth des Password1 pri des Password123
  
• D. ip access-list standard nms
  permit 10.15.2.19 255.255.255.255
  
  snmp-server view ro iso included
  
  snmp-server view ro ifEntry included
  
  snmp-server group nms v3 priv read ro access nms
  snmp-server user user1 nms v3 auth 3des Password1 pri aes 192 Password123

Discussions

Discussions hidden. Click reveal to view 1 linked thread.