ExamTopics 350-401 Snapshot

Question #: 552 Topic #: 1

827184

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Interface Gi0/1 on Switch1 must be configured as desirable.
B. Trunking must be enabled on both interfaces on Switch2.
C. Interface Gi0/0 on Switch2 must be configured as passive.
D. Interface Gi0/1 on Switch2 must be configured as active.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 553 Topic #: 1

827185

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1#ip routing R1#(config)#ip vrf 100 R1#(config-vrf)#rd 100:1 R1#(config-vrf)# address family ipv4 ! R1(config)#interface Gi0/2 R1(config-if)#ip address 10.0.1.1 255.255.255.0 R1#show ip route
B. R1#ip routing R1#(config)#ip vrf 100 ! R1(config)#interface Gi0/2 R1(config-if)#ip address 10.0.1.1 255.255.255.0 R1#showip route
C. R1#ip routing R1#(config)#ip vrf 100 ! R1(config)#interface Gi0/2 R1(config-if)#ip vrf forwarding 100 R1(config-if)#ip address 10.0.1.1 255.255.255.0 R1#show ip vrf
D. R1#ip routing R1#(config)#ip vrf 100 ! R1(config)#interface Gi0/2 R1(config-if)#ip address 10.0.1.1 255.255.255.0 R1#show ip vrf

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 554 Topic #: 1

827186

Answers

Correct answer and vote data stay hidden until you click reveal.

A. In sparse mode, it establishes neighbor adjacencies and sends hello messages at 5-second intervals.
B. It uses the multicast routing table to perform the multicast forwarding function.
C. It uses unicast routing information to perform the multicast forwarding function.
D. It uses broadcast routing information to perform the multicast forwarding function.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 555 Topic #: 1

827187

Answers

Correct answer and vote data stay hidden until you click reveal.

A. VNI
B. GRE
C. VTEP
D. EVPN

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 556 Topic #: 1

827188

Answers

Correct answer and vote data stay hidden until you click reveal.

A. PC1 goes from ALSW1 to DSW2 to CORE to DSW1.
B. PC1 goes from ALSW1 to DSW2 to ALSW2 to DSW1.
C. PC1 goes from ALSW1 to DSW2 to DSW1.
D. PC1 goes from ALSW1 to DSW1.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 557 Topic #: 1

827189

Answers

Correct answer and vote data stay hidden until you click reveal.

A. c0:41:99:98:06:16
B. 00:00:0c:07:ac:16
C. 00:00:0c:07:ac:22
D. c0:07:0c:ac:00:22

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 558 Topic #: 1

827190

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The client database entry moves from controller A to controller B
B. A CAPWAP tunnel is created between controller A and controller B
C. Client 1 uses an EoIP tunnel to contact controller A
D. Client 1 contacts controller B by using an EoIP tunnel

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 559 Topic #: 1

827191

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Developer Toolkit
B. platform management
C. platform bundles
D. Runtime Dashboard

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 560 Topic #: 1

827192

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 32 conform-action transmit exceed-action drop violate-action transmit
B. R1(config)#policy-map POLICY-CoPP R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 320000 conform-action transmit exceed-action drop violate-action drop
C. R1(config)#policy-map POLICY-CoPP R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 320000 conform-action transmit exceed-action transmit violate-action drop
D. R1(config)#control-plane R1(config-cp)# service-policy output POLICY-CoPP
E. R1(config)#control-plane R1(config-cp)# service-policy input POLICY-CoPP

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 561 Topic #: 1

827193

Answers

Correct answer and vote data stay hidden until you click reveal.

A. API Explorer
B. REST Explorer
C. Postman
D. Mozilla

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 562 Topic #: 1

827194

Answers

Correct answer and vote data stay hidden until you click reveal.

A. 6 dBm
B. 14 dBm
C. 17 dBm
D. 20 dBm

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 563 Topic #: 1

827195

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The standby route processor temporarily forwards packets until route convergence is complete.
B. An NSF-aware device immediately updates the standby route processor RIB without churning the network.
C. An NSF-capable device immediately updates the standby route processor RIB without churning the network.
D. The standby route processor immediately takes control and forwards packets along known routes

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 564 Topic #: 1

827196

Answers

Correct answer and vote data stay hidden until you click reveal.

A. show netconf rpc-reply
B. show netconf | section rpc-reply
C. show netconf schema | section rpc-reply
D. show netconf xml rpc-reply

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 565 Topic #: 1

827197

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 566 Topic #: 1

827198

Answers

Correct answer and vote data stay hidden until you click reveal.

A. CISCO.CONTROLLER localdomain
B. CISCO.CAPWAP.CONTROLLER localdomain
C. CISCO-CONTROLLER localdomain
D. CISCO-CAPWAP-CONTROLLER.localdomain

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 567 Topic #: 1

827199

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 568 Topic #: 1

827200

Answers

Correct answer and vote data stay hidden until you click reveal.

A. provisioning a wireless LAN controller
B. creating a configuration template
C. upgrading the Cisco DNA Center software
D. graceful shutdown of Cisco DNA Center

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 569 Topic #: 1

827201

Answers

Correct answer and vote data stay hidden until you click reveal.

A. (config-mon-erspan-dst-src)# erspan-id 172.16.10.10
B. (config mon erspan-dst-src)# erspan-id 110
C. (config-mon-erspan-dst-src)# no shut
D. (config-mon-erspan-dst-src)# origin ip address 172.16.10.10

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 570 Topic #: 1

827202

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The border node is required for communication between fabric and nonfabric devices.
B. Traffic within the fabric always goes through the control plane node.
C. Fabric endpoints are connected directly to the border node.
D. The control plane node has the full RLOC-to-EID mapping database.
E. The border node has the full RLOC-to-EID mapping database.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 571 Topic #: 1

827203

Answers

Correct answer and vote data stay hidden until you click reveal.

A. only when using Mobility Express
B. only when using 2.4 GHz
C. when it provides the required coverage
D. only when using 5 GHz

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 572 Topic #: 1

827204

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure no neighbor 192.168.12.1 shutdown under R2 BGP process.
B. Configure neighbor 2.2.2.2 remote-as 65002 under R1 BGP process.
C. Configure ip route 1.1.1.1 0.0.0.0 192.168.12.1 on R2.
D. Configure neighbor 192.168.12.1 activate under R2 BGP process.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 573 Topic #: 1

827205

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Cisco DNA Spaces
B. Cisco Unified Wireless Network
C. Cisco Mobility Express
D. Cisco Catalyst switch with embedded controller

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 574 Topic #: 1

827206

Answers

Correct answer and vote data stay hidden until you click reveal.

A. marking
B. shaping
C. policing
D. classification

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 575 Topic #: 1

827207

Answers

Correct answer and vote data stay hidden until you click reveal.

A. access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp-data access-list 101 permit ip any any
B. access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp-data access-list 101 permit ip any any
C. interface GigabitEthernet0/0 ip address 10.0.0.1 255.255.255.252 ip access-group 101 out
D. access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp access-list 101 permit ip any any
E. interface GigabitEthernet0/0 ip address 10.0.101.1 255.255.255.252 ip access-group 101 in

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 576 Topic #: 1

827208

Answers

Correct answer and vote data stay hidden until you click reveal.

A. PUT
B. CREATE
C. GET
D. POST

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 577 Topic #: 1

827209

Answers

Correct answer and vote data stay hidden until you click reveal.

A. LDAP
B. EAP-FAST
C. EAP-TLS
D. PEAP

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 578 Topic #: 1

827210

Answers

Correct answer and vote data stay hidden until you click reveal.

A. line vty 0 15 password XD822j
B. service password-encryption
C. username netadmin secret 7 $1$42J31k98867Pyh4QzwXyZ4
D. username netadmin secret 9 $9$vFpMf8elb4RVV8$seZ/bDA

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 579 Topic #: 1

827211

Answers

Correct answer and vote data stay hidden until you click reveal.

A. random addresses in the 155.1.1.0/24 range
B. 155.1.1.1
C. their own address in the 10.10.10.0/24 range
D. 155.1.1.5

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 580 Topic #: 1

827212

Answers

Correct answer and vote data stay hidden until you click reveal.

A. transmitter power
B. antenna cable loss
C. antenna gain
D. signal-to-noise ratio

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 581 Topic #: 1

827213

Answers

Correct answer and vote data stay hidden until you click reveal.

A. separation of privilege
B. password hashing
C. confidential algorithms
D. OAuth

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 582 Topic #: 1

827214

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1(config)#no ip route 192.168.50.2 255.255.255.255 Gi0/0
B. R1(config)#ip route 2.2.2.2 255.255.255.255 192.168.50.2
C. R1(config)#router bgp 65002 R1(config-router)#neighbor 192.168.50.2 shutdown
D. R1(config)#router bgp 65001 R1(config-router)#neighbor 192.168.50.2 shutdown

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 583 Topic #: 1

827215

Answers

Correct answer and vote data stay hidden until you click reveal.

A. BFD
B. RP failover
C. NSF
D. RPVST+

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 584 Topic #: 1

827216

Answers

Correct answer and vote data stay hidden until you click reveal.

A. c0:42:31:98:86:0f
B. 05:af:1c:0f:ac:15
C. 00:00:0c:07:ac:0f
D. 05:5e:ac:07:0c:0f

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 585 Topic #: 1

827217

Answers

Correct answer and vote data stay hidden until you click reveal.

A. directional
B. polarized
C. omnidirectional
D. Yagi

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 586 Topic #: 1

827218

Answers

Correct answer and vote data stay hidden until you click reveal.

A. VLAN
B. VPC
C. VXLAN
D. VSS

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 587 Topic #: 1

827219

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Enable DFS channels because they are immune to radar interference.
B. Restore the DCA default settings because this automatically avoids channel interference.
C. Remove UNII-2 and Extended UNII-2 channels from the 5 Ghz channel list.
D. Disable DFS channels to prevent interference with Doppler radar.
E. Configure channels on the UNII-2 and the Extended UNII-2 sub-bands of the 5 Ghz band only.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 588 Topic #: 1

827220

Answers

Correct answer and vote data stay hidden until you click reveal.

A. tunnel source 172.16.1.0
B. tunnel source 200.1.1.1
C. tunnel destination 200.1.1.1
D. tunnel source 192.168.1.2

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 589 Topic #: 1

827221

Answers

Correct answer and vote data stay hidden until you click reveal.

A. interface Gig0/0 ip ospf network non-broadcast
B. interface Gig0/0 ip ospf network point-to-multipoint
C. interface Gig0/0 ip ospf network point-to-point
D. interface Gig0/0 ip ospf network broadcast

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 590 Topic #: 1

827222

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Communication between VRRP members is encrypted using MD5.
B. There is no route to 10.10.1.1/32 in R2's routing table.
C. R1 is primary if 10.10.1.1/32 is in its routing table.
D. If R1 reboots, R2 becomes the primary virtual router until R2 reboots.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 591 Topic #: 1

827223

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 592 Topic #: 1

827224

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 593 Topic #: 1

827225

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 594 Topic #: 1

827226

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 595 Topic #: 1

847462

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The NAT ACL and NAT pool share the same name.
B. The translation does not use address overloading.
C. The NAT ACL does not match all internal hosts.
D. The NAT pool netmask is excessively wide.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 596 Topic #: 1

847463

Answers

Correct answer and vote data stay hidden until you click reveal.

A. to connect a site to the LISP-capable part of a core network publish the EID-to-RLOC mappings for the site, and respond to map-request messages
B. to advertise routable non-LISP traffic from one address family to LISP sites in a different address family
C. to send traffic to non-LISP sites when connected to a service provider that does not accept nonroutable EIDs as packet sources
D. to decapsulate map-request messages from ITRs and forward the messages to the MS

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 597 Topic #: 1

847464

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure 172.16.20.0 as a stub network.
B. Configure graceful restart on the 172.16.20.0 interface.
C. Configure a passive interface on R2 toward 172.16.20.0.
D. Apply a policy to filter OSPF packets on R2.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 598 Topic #: 1

847465

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Both switches operate in the PVST+ mode.
B. Spanning tree is disabled automatically on the network.
C. Both switches operate in the Rapid PVST+ mode.
D. DSW2 operates in Rapid PVST + and the new switch operates in PVST+.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 599 Topic #: 1

847466

Answers

Correct answer and vote data stay hidden until you click reveal.

A. IS-IS
B. OSPF
C. VXLAN
D. LISP

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 600 Topic #: 1

847467

Answers

Correct answer and vote data stay hidden until you click reveal.

A. print(response['result'][0]('simple_time'])
B. print(response['result']['body']( 'simple_time'])
C. print(response['body']['simple_time'])
D. print(response['jsonrpc']['body'][ 'simple_time'])

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 601 Topic #: 1

847468

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Device(config-mon-erspan-src-dst)# no vrf 1
B. Device(config-mon-erspan-src)# no filter vlan 30
C. Device(config-mon-erspan-src-dst)# mtu 1460
D. Device(config-mon-erspan-src-dst}# erspan-id 6

Discussions

Discussions hidden. Click reveal to view 1 linked thread.