ExamTopics 350-401 Snapshot

Question #: 181 Topic #: 1

826813

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure both interfaces to nonegotiate and ensure that the switches are in different VTP domains.
B. Configure both interfaces in dynamic auto DTP mode and ensure that the switches are in the same VTP domain.
C. Configure both interfaces in dynamic auto DTP mode and ensure that the switches are in different VTP domains.
D. Configure both interfaces in dynamic desirable DTP mode and ensure that the switches are in the same VTP domain.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 182 Topic #: 1

826814

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The device's HSRP group uses the virtual IP address 10.0.3.242.
B. The device is configured with the default HSRP priority.
C. The device sends unicast messages to its peers.
D. The standby device is configured with the default HSRP priority.
E. The device is using the default HSRP hello timer.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 183 Topic #: 1

826815

Answers

Correct answer and vote data stay hidden until you click reveal.

A. patch
B. dipole
C. omnidirectional
D. Yagi

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 184 Topic #: 1

826816

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 185 Topic #: 1

826817

Answers

Correct answer and vote data stay hidden until you click reveal.

A. DSW2(config)#interface gi1/3
B. DSW1(config-if)#spanning-tree port-priority 0
C. DSW2(config-if)#spanning-tree port-priority 128
D. DSW1(config)#interface gi1/3
E. DSW2(config-if)#spanning-tree port-priority 16

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 186 Topic #: 1

826818

Answers

Correct answer and vote data stay hidden until you click reveal.

A. mobility MAC on the 5520 cluster
B. mobility MAC on the 9800 WLC
C. new mobility on the 5520 cluster
D. new mobility on the 9800 WLC

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 187 Topic #: 1

826819

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R2 standby 1 priority 90 standby 1 preempt
B. R2 standby 1 priority 100 standby 1 preempt
C. R1 standby 1 preempt R2 standby 1 priority 90
D. R1 standby 1 preempt R2 standby 1 priority 100

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 188 Topic #: 1

826820

Answers

Correct answer and vote data stay hidden until you click reveal.

A. WPA2 (AES)
B. 802.1X
C. OPEN
D. WEP
E. WPA (AES)

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 189 Topic #: 1

826821

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Utilize DHCP option 43.
B. Utilize DHCP option 17.
C. Configure an ip helper-address on the router interface.
D. Enable port security on the switch port.
E. Configure WLC IP address on LAN switch

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 190 Topic #: 1

826822

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure switchport mode trunk on SW2.
B. Configure switchport nonegotiate on SW3.
C. Configure channel-group 1 mode desirable on both interfaces.
D. Configure channel-group 1 mode active on both interfaces.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 191 Topic #: 1

826823

Answers

Correct answer and vote data stay hidden until you click reveal.

A. GigabitEthernet0/0 and GigabitEthernet0/1
B. only GigabitEthernet0/1
C. only GigabitEthernet0/0
D. GigabitEthernet0/1 and GigabitEthernet0/1.40

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 192 Topic #: 1

826824

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 193 Topic #: 1

826825

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Cisco Discovery Protocol neighbor
B. querying other APs
C. DHCP Option 43
D. broadcasting on the local subnet
E. DNS lookup CISCO-DNA-PRIMARY.localdomain

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 194 Topic #: 1

826826

Answers

Correct answer and vote data stay hidden until you click reveal.

A. It enables Layer 2 and Layer 3 roaming between itself and the primary controller.
B. It registers the LAPs if the primary controller fails.
C. It avoids congestion on the primary controller by sharing the registration load on the LAPs.
D. It shares the traffic load of the LAPs with the primary controller.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 195 Topic #: 1

826827

Answers

Correct answer and vote data stay hidden until you click reveal.

A. text string
B. username and password
C. RADIUS token
D. certificate

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 196 Topic #: 1

826828

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The client has incorrect credentials stored for the configured broadcast SSID.
B. The hidden SSID was not manually configured on the client.
C. The broadcast SSID was not manually configured on the client.
D. The client has incorrect credentials stored for the configured hidden SSID.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 197 Topic #: 1

826829

Answers

Correct answer and vote data stay hidden until you click reveal.

A. APs that operate in FlexConnect mode cannot detect rogue APs.
B. When connected to the controller, FlexConnect APs can tunnel traffic back to the controller.
C. FlexConnect mode is used when the APs are set up in a mesh environment and used to bridge between each other.
D. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled APs to exclude themselves from managing data traffic between clients and infrastructure.
E. FlexConnect mode is a wireless solution for branch office and remote office deployments.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 198 Topic #: 1

826830

Answers

Correct answer and vote data stay hidden until you click reveal.

A. By entering the command spanning-tree portfast trunk in the interface configuration mode.
B. By entering the command spanning-tree mst1 vlan 10,20,30,40 in the global configuration mode.
C. By entering the command spanning-tree portfast in the interface configuration mode.
D. By entering the command spanning-tree vlan 10,20,30,40 root primary in the interface configuration mode.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 199 Topic #: 1

826831

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Switch1(config)# spanning-tree portfast bpdufilter default Switch1(config)# interface f0/1 Switch1(config-if)# spanning-tree portfast
B. Switch1(config)# spanning-tree portfast bpduguard default Switch 1 (config)# interface f0/1 Switch1 (config-if)# spanning-tree portfast
C. Switch1(config)# interface f0/1 Switch1(config-if)# spanning-tree portfast
D. Switch1(config)# interface f0/1 Switch1(config-if)# spanning-tree portfast Switch1 (config-if)# spanning-tree bpduguard enable

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 200 Topic #: 1

826832

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Set the MED to 1 on PE2 toward BR2 outbound.
B. Set the origin to igp on BR2 toward PE2 inbound.
C. Set the weight attribute to 65,535 on BR1 toward PE1.
D. Set the local preference to 150 on PE1 toward BR1 outbound.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 201 Topic #: 1

826833

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 202 Topic #: 1

826834

Answers

Correct answer and vote data stay hidden until you click reveal.

A. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#access-list 1 10.10.10.0 0.0.0.255 RouterR1(config)#ip nat inside source list 1 interface f0/1 overload
B. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#access-list 1 10.10.10.0 0.0.0.255 RouterR1(config)#ip nat pool POOL 155.1.1.101 155.1.1.103 netmask 255.255.255.0 RouterR1(config)#ip nat inside source list 1 pool POOL
C. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#ip nat inside source static 10.10.10.101 155.1.1.101 RouterR1(config)#ip nat inside source static 10.10.10.102 155.1.1.102 RouterR1(config)#ip nat inside source static 10.10.10.103 155.1.1.103
D. RouterR1(config)#int f0/0 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#ip nat inside source static 10.10.10.101 155.1.1.101 RouterR1(config)#ip nat inside source static 10.10.10.102 155.1.1.102 RouterR1(config)#ip nat inside source static 10.10.10.103 155.1.1.103

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 203 Topic #: 1

826835

Answers

Correct answer and vote data stay hidden until you click reveal.

A. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode negotiate NewYork(config-if)#end NewYork#
B. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode on NewYork(config-if)#end NewYork#
C. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode passive NewYork(config-if)#end NewYork#
D. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode auto NewYork(config-if)#end NewYork#

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 204 Topic #: 1

826836

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Configure more member ports on Switch1.
B. Configure less member ports on Switch2.
C. Configure the same port channel interface number on both switches.
D. Configure the same EtherChannel protocol on both switches.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 205 Topic #: 1

826837

Answers

Correct answer and vote data stay hidden until you click reveal.

A. The first packet triggered NAT to add an entry to the NAT table.
B. R1 is configured with NAT overload parameters.
C. A Telnet session from 160.1.1.1 to 10.1.1.10 has been initiated.
D. R1 is configured with PAT overload parameters.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 206 Topic #: 1

826838

Answers

Correct answer and vote data stay hidden until you click reveal.

A. OSPF area change
B. MTU mismatch
C. IP address mismatch
D. hello packet mismatch

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 207 Topic #: 1

826839

Answers

Correct answer and vote data stay hidden until you click reveal.

A. R1(config-router)#neighbor 10.10.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
B. R2(config-router)#neighbor 10.120.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
C. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor PEER password Cisco
D. R1(config-router)#neighbor 10.120.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
E. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 208 Topic #: 1

826840

Answers

Correct answer and vote data stay hidden until you click reveal.

A. Change Switch2 to switch port mode dynamic auto.
B. Change the VTP domain to match on both switches.
C. Change Switch1 to switch port mode dynamic auto.
D. Change Switch1 to switch port mode dynamic desirable.

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 209 Topic #: 1

826841

Discussions

Discussions hidden. Click reveal to view 1 linked thread.

Question #: 210 Topic #: 1

826842

Discussions

Discussions hidden. Click reveal to view 1 linked thread.